News

Home > News

Admatec news

News

September 1, 2022

How 3D Printing plus Casting combine the strengths of both

Additive Manufacturing Media interviews Aristo cast ...

Press release

July 8, 2022

Admatec and Formatec have been acquired by Nanodimension

We are convinced that we shall be able to further expand and accelerate our growth ...

News

July 1, 2022

Two Admaflex 130 machines delivered and installed at the Sustainable Materials and Industrial Processes 4.0 laboratory of ENEA in Italy

Ceramic and Metal 3D printing at its best ...

Press release

June 17, 2022

Admaflex300 ceramic and metal printer with 12 million pixels

Should I choose one big printer or 3 small ones? ...

Press release

May 6, 2022

Admatec scales up to offer ceramics 3D printing production lines

High volume 3D printing of high performance technical ceramics ...

News

December 15, 2021

Sigma Clermont in France receives its Admaflex printer for bioceramics

shaping new materials for patient specific medical implants ...

News

October 25, 2021

The National Research Council of Canada joins Admatec in the pursuit of advancing materials for 3D printing

Dr. Chantal Paquet is looking forward to using Admatec’s open platform Admaflex printer to help her realize her vision ...

News

June 4, 2021

The latest Admaflex software is a complete solution

No need for a separate PC with slicing software, no need to buy additional modules to have full access ...

News

March 8, 2021

Additive Manufacturing of Bioceramics at Sichuan University

Customized bio-active 3D-printed calcium phosphate bioceramics can be used for maxillofacial bone repair, tumor bone defect filling, articular cup and elbow bone replacement. ...

News

January 29, 2021

Admaflex Technology allows further increase in productivity and efficiency

The Admaflex300 is now available with 40% larger build platform ...

News

January 4, 2021

Zurich University of Applied Sciences partners with Admatec

An Admaflex 130 printer has been installed recently as the lab's latest flagship in ceramic 3D printing ...

News

December 9, 2020

How Investment casting can compete with Direct Metal Laser Sintering by using 3D printed ceramic shells

A fuel nozzle, originally made of 7 separate parts, can be casted successfully at Aristo-cast ...

Press release

September 29, 2020

Admatec commercializes new slurries dedicated to the investment casting industry

Admatec is excited to announce new materials to use on the Admaflex 130 and 300 series dedicated to the investment casting market ...

News

June 22, 2020

SUPSI invests in Admaflex 130 3D printer for development and production of ceramics

To take the next step in ceramic material development and production of porous ceramic architectures for filtration, catalysis and heat exchange, SUPSI invested in the Admaflex 130 printer series ...

News

June 19, 2020

Publication in PIM magazine on how sinter-based AM can compete with Powder Injection Moulding

Article on how sinter-based AM and PIM differ, explained through different case studies. They can compete, but also complement one another. ...

News

June 17, 2020

Webinar recording on the manufacturing possibilities of copper now online

Together with Formatec we hosted an online presentation on the possibilities of PIM and 3D printing copper ...

Press release

June 9, 2020

Admatec introduces bioresorbable ceramics from CAM Bioceramics

CAM Bioceramics is an ISO 13485:2016 certified supplier of medical grade ceramic materials, supporting Admatec to enable printing medically approved ceramic material on the Admaflex 3D printing systems, opening up opportunities for the medical and dental sectors. ...

Event

May 19, 2020

Admatec and Formatec to host online presentation on the manufacturing possibilities of copper

20-minutes online PechaKucha presentation on 3D printing and PIM copper ...

News

May 15, 2020

Steps of 3D printing with the Admaflex Technology explained

Watch this video to see a short explanatory video on the ease of use of the Admaflex 3D printer series ...

News

May 14, 2020

New material: thin-walled Alumina slurry

The ability to 3D print 100 µm thin-walled ceramic structures supporting functionality and extending performance truly sets a new standard for applications, especially for novelties like 5G antennas ...

News

May 12, 2020

3 reasons to get your Admaflex 130 upgraded

The possibilities with 3D printing technology are rapidly advancing. At Admatec we have anticipated on these improvements by providing the opportunity to keep up with the latest tech developments. ...

News

May 8, 2020

3D print your copper parts on the Admaflex series

Copper is an interesting material, especially thanks to the anti-microbial properties that recently gained much interest in link to the COVID-19 pandemic ...

Blog

March 11, 2020

5 most FAQs about 3D printing with Admaflex Technology

Typically there are two types of people interested in the Admaflex Technology; the ones that know ceramic and its beneficial properties, who are curious to know more about this different manufacturing process. ...

Press release

February 20, 2020

Network of service bureaus for on-demand 3D printing of advanced ceramics with Admaflex Technology is expanding

Enabling to serve customers with 3D printed ceramics for various high-tech industries. ...

Press release

November 14, 2019

Admatec introduces the Admaflex 300; a flexible, high-volume ceramic and metal 3D printer for production of large scale parts

Upscaling the build volume to 200x200x300mm with integrated in-process quality monitoring and upgradable to handle a broad range of materials and an automated feedstock dosing system allowing the production of large products. ...

Press release

September 2, 2019

Admatec introduces vision-based process monitoring to their ceramic & metal 3D printers

Upgrading the Admaflex Technology for full traceability and documentation of the 3D printing process ...

Press release

March 29, 2019

Admatec and Aristo-Cast jointly present new pattern-less investment casting process with additive manufacturing

In 2017, Aristo-Cast started working with the Admaflex 130 ceramic 3d printer to develop a new process that would revolutionize the traditional investment casting process. ...

News

January 4, 2019

3D printing with your Admaflex 130 is now even more flexible than before!

The newly released software update allows your Admaflex 130 to handle multiple parts, with unique parameter sets, in one print job. ...

News

October 4, 2018

Admatec Europe is moving!

Business is growing, therefore we are expanding our facilities. ...